Page 6 of 9

Re: All in on a new build...

Posted: Sat Oct 08, 2011 12:36 pm
by IceT-Bag
Timus Takus :lol:

Re: All in on a new build...

Posted: Mon Oct 10, 2011 8:54 pm
by Shaggy
Your hard drive may have a bad sector :flasher:

Re: All in on a new build...

Posted: Mon Oct 10, 2011 9:49 pm
by Mr. Plow
Shaggy wrote:Your hard drive may have a bad sector :flasher:
Something is up 'cause I'll have to boot up 5+ times to get windows rolling... thinking it might have something to do with the sata controller. Haven't had time to find and correct the error though. Just seems strange that I can actually boot windows sometimes and sometimes not :cry:

Re: All in on a new build...

Posted: Mon Oct 10, 2011 10:07 pm
by IceT-Bag
Is your SATA drive running the latest firmware?

I've heard of SSD issues when older firmware caused conflicts.

Re: All in on a new build...

Posted: Mon Oct 10, 2011 10:43 pm
by Mr. Plow
Nope... tried to but the firmware updater couldn't find my drive :shock: I think next step is to update the BIOS.

Re: All in on a new build...

Posted: Tue Oct 11, 2011 9:24 am
by Porky
Mr. Plow wrote:
Shaggy wrote:Your hard drive may have a bad sector :flasher:
Something is up 'cause I'll have to boot up 5+ times to get windows rolling... thinking it might have something to do with the sata controller. Haven't had time to find and correct the error though. Just seems strange that I can actually boot windows sometimes and sometimes not :cry:

good job its 5 times faster than mine then :p

Re: All in on a new build...

Posted: Tue Oct 11, 2011 5:50 pm
by umbongo(uk)
lol porks no good being faster if its an unstable thing :)


some interesting reading for the ssd crowd nice 6 pages on what u bought how it works and why you should scrutinise what make /model your buying slc v mlc blah blah blah blah of to put this gammon in the oven im starving
http://www.computerworld.com/s/article/ ... geNumber=1

Re: All in on a new build...

Posted: Tue Oct 11, 2011 7:07 pm
by Mr. Plow
umbongo(uk) wrote:lol porks no good being faster if its an unstable thing :)


some interesting reading for the ssd crowd nice 6 pages on what u bought how it works and why you should scrutinise what make /model your buying slc v mlc blah blah blah blah of to put this gammon in the oven im starving
http://www.computerworld.com/s/article/ ... geNumber=1
Thanks for the link. I'll read it before I go to bed :p Will try and install windows 7 on an old school SATA drive to rule out faults in the other components. BTW if by chance windows actually starts it sometimes "hangs" for long periods of time,,, :?

Re: All in on a new build...

Posted: Tue Oct 11, 2011 8:28 pm
by umbongo(uk)
any chance u can list the model plow so i can have a look at it and see the specs are .i may then be able to deduce if owts wrong
cant remember were but another site i was on a while back ,was telling peeps to be wary and that all sdd are not alike due to the limited cache que.on cheap models..i stuck to my cf card as its just as [sh*t] but kubuntu works a treat lool
(note to self must restart bookmarking sites again even if it does mean sifting thru 900 links just to find elf women from barnsley in the list )

Re: All in on a new build...

Posted: Tue Oct 11, 2011 9:59 pm
by Mr. Plow
yeah mate :) it's a CORSAIR FORCE GT SERIES 3 2.5" 120GB SSD MLC (capital letters because I'm shouting) and it's hooked up to ASUS MAXIMUS IV EXTREME-Z Z68 S-1155 E-ATX (rev. 3.0 if I'm not mistaking). Bookmarking pfffff where's the fun in that? stick to browser history - it's a much bigger challenge :lol:

And now it seems that my old SATA disc is sleeping with the fishes judging by the clonking noises it makes. Maybe I should stay clear of computers and components all together!